System Components

Insulation Board

730x247_crop

 

Terraco EIFS strives to utilise the most suitable type of insulation board depending on the job at hand:

  • Expanded Polystyrene Insulation Board (EPS )is the most cost effective board used for general application and new buildings
  • Graphite EPS has 10% more efficient insulation properties, hence thinner sections are required and the product lends itself well for renovation work.
  • Extruded Polystyrene Insulatio Board (XPS) has excellent impact resistance for special use in high traffic areas of where impact can be expected. It is also excellent for hot countires where a board with low vapour permeability is desired.
  • Mineral Wool Insulation Board (MW) has high breathability and is completety fireproof, so its use with wooden substructures is recommended. It is also recommended where the moisture level in the substrate is high.

730x385_crop

 

System Profiles

 

PVC Corner Bead with Mesh

Window Reveal Bead

Drip nose Bead

Groove Bead

Movement Bead

Starter Base Profile

Mechanical Fastenings

Fastener with Steel Expansion Pin

Fastener with Plastic Expansion Pin

Fastener for Aerated Lightweight Concrete (ALC)

Glass Fibre Mesh

Adhesive – Styrofix

A polymer modified dry-mix adhesive promoting excellent adhesion between various substrates and the insulation boards.

Basecoat - Styrobond

A polymer modified drymix basecoat, applied over the insulation boards, which gives the system impact resistance and flexibility. The reinforcing glass fibre mesh is embedded into Styrobond DP prior to application of finish coats

Primers

Terraco offers a comprehensive range of primers for use with Terraco EIFS and these include P Primer Pigmented, P Primer Clear, P Primer Textured and Silprime.

TOP